Bistable Rotary Solenoids of the PDM series
Patented design that combines short switching times, high holding torque and damped operation.
The bistable rotary solenoids of the Kendrion PDM series are extremely fast switching rotating magnets for the optimum performance of demanding sorting and actuating tasks. With a speed of less than 10 ms, letters, banknotes or parcels can be sorted extremely fast and in the correct position. The high rotational speed is achieved by reversing the polarity of the rotary solenoid. The safe end position is realized by a permanent magnet. The so called "Polarised Rotary Solenoids" (PDM) are used in automation and logistcs as a cost-saving alternative to pneumatics or motor solutions due to their energy efficiency.
The Bistable Rotary Solenoid is protected by a solid aluminum housing. The insulation class is IP50; an increase to IP65 is possible using additional housing. The nominal voltage is 24 or 48 Volt; the torque is 1 Ncm to 1 Nm. The end positions are fixed with holding torque of up to 1 Nm. Depending on the application, a rotation angle of up to 60° can be realized. Hall sensors can be used as an option to check whether the magnet has reached the start or end position.
The PDM line convinces by high reliability. Thanks to the permanent magnetic holding (bistable rotary solenoid), the ball bearing and the integrated damping our fast switches easily accomplish 100 million switching cycles.
Bistable Rotary Solenoids
Both end positions of the magnet are held by the rotor with a high holding torque.
Monostable Rotary Solenoid
Only one end position is held. This allows the solenoid to operate both "clockwise" and "counterclockwise."
Customer-specific adaptations
Due to the modular design of the PDM rotary solenoid series, customer adaptations and customized solutions are easy to implement.
Technical Data
Alternative specifications on request
Type | Diameter | Supply Voltage | Power | Rotation angle | Switching time | Currentless holding torque |
---|---|---|---|---|---|---|
PDM050 (bistable) | 50mm | 24-48V DC | 60-100W | max. 40° | 10-20ms | bis 0.15 Nm |
PDM050 (monostable) | 50mm | 24-48V DC | 60-100W | max. 30° | ca. 20ms | bis 0.4 Nm |
PDM060 (bistable) | 60mm | 24-48V DC | 96-120W | max. 30° | 10-20ms | bis 0.9 Nm |
PDM080 (bistable) | 80mm | 24-48V DC | 84W | max. 40° | ca. 20ms | bis 1.0 Nm |
The functionality of the rotary magnet series PDM
The design of the PDM series DC rotary solenoid is very similar to that of motors. The bistable rotary solenoids consist of a stator equipped with several coils and a polarized rotor, which is arranged rotatably. By reversing the polarity of the stator coils, a fast rotary movement of the rotor is generated. Two stops limit the rotary movement. The rotary solenoid holds the end positions (defined by the stops) with a high holding torque. This results from the attractive force between the stator and the permanent magnet rotor.
Permanent magnets are magnetic materials that are manufactured using neodymium.